| Brand | Wessex |
| Bulb Wattage | 5 W |
| Colour | Gold |
| Features | LED, Dimmable |
| Item Height | 2 cm |
| Item Weight | 40 g |
| Lighting Technology | LED |
| Material | Stainless Steel, Brass, Steel |
| MPN | IN25 |
| Number in Pack | 1 |
| Power | 150 W |
| Power Consumption | 5 W |
| Type | Dimmer |
Reasonable but a little pricey. I've had a few of these because eventually the push button stops working. As I have to keep replacing them they should be a bit cheaper.
Bought to replace a faulty dimmer but retain the original brass Georgian style faceplate. This fitted perfectly and of course just works. It is compatible with dimmable LEDs so it is future-proof.
Great service from Toolstation as always.
did not these existed as replacement for dimmer switches. Happy to find this and saved me from buying a complete set of dimmer swithc with 3 of these. very smooth turning and hope it lasts.
Worked as expected but failed to set minimum setting on LED lamps but works ok without it. Does LED,hologen and filament lamps.
Nice unit, easy to fit. Excellent and convenient service
Worked as a replacement for my previous dimmer that had failed (this is now the third I've needed for my bathroom light – the on/off clicker tends to fail over time on this type of switch).
They sell this as a "universal" replacement but it didn't quite fit in the grid frame in my switch: the bottom hit the frame so the switch is now mounted at a slight angle, which is a bit annoying). But other than that, it is functional, and my LED lights don't flicker with it. It is supposed to handle both leading and trailing edge, "automatically", and default to trailing. The leaflet is not the easiest to understand but it is possible. Switching modes (and setting min/max brightness levels) is done by switching the light on and off at various positions in certain sequences, within a 10s time window.
item ready for collection. on time. Wiring on replacement was slightly different, but supplied leaf;et showed this, and was not a problem
Bought to replace broken dimmer switch in 3 gang light switch and fitted perfectly and works well.
There are more expensive ones out there. This one works! That's all I need.
Good quality, does what I wanted, happy with it, would purchase again
Easy to fit does the job. Good range of dimming for 4 ceiling LED spotlights
Exactly what I wanted and a good price too! Highly recommend.
Used this to replace an old dimmer switch. When we changed to LED lamps we noticed that they would flicker from time to time - this unit can cope with the lower power consumption of the LEDs. This one is also useful as you can retain your original decorative cover etc. though I guess you could just buy a cheaper full switch assembly & do a transplant..... My wife is delighted with the elimination of the flicker so it is worth it on that count! It's easy to fit also so would recommend.
Great value and works well. Make sure you read instructions; common is output and L1 is permant live!
undid the screws to fit the wires and it fell apart, simply because it uses bent legs from the circuit board to hold it all together undo all three screw it falls apart undo and fit the wires one at a time and it stays together , problem is most electricians don't have the pleasure of working in wide areas so on occasions you need to undo all three screw so its easier to get the wires in when your limited for space the result of that is it falls apart
Great little dimmer for dimmable led fittings and lamps, works really well, no flicker
It works fine, was easy to install, so quite happy with it
Good product easy to replace highly recommend this product
Not very good in comparison to other brands led dimmer. Doesn’t fit backplates very well either.
Good quality product, just a bit too expensive ...
