Does exactly what you would expect, good price and what was needed
Tricky to use with thick cables. Finercky to close the box lid with cables.
Good robust construction. Versatile and easy to use.
This is a great box but could be a little better. This is simply down to my personal preference for the 221s. I never really use 2273s so, for me, more slots for 221s and fewer for 2273s would be better.
Standard piece of equipment does what it’s meant for
Does the job simply and efficiently when combined with any 221 clips. Plenty of room to arrange
Exactly what i needed, alot better than the old style junction boxs.
Spot on with no complaints from the electrician. Electrician was happy with this product
Wago products always seem to be able to do the job. Good size. Used for 6 2.5mm cables.
Handy large junction box. Plenty of room for multiple cables and Wago connectors. To use all the connector slots you will need 2 different types of connector, Wago 221 and 2273.
I needed a box to cover a wiring connection when replacing a fluorescent tube with an led strip light. This allowed me protect the existing connections without talking them apart. It is very good quality too
Nice little box. Clever features but it should have included the mounting buttons yet didn't. I assume this is an oversight by whoever packs and despatches these boxes as the mounting buttons are a loose item
Upgrading a two-way switch lighting circuit to a three-way system required additional cable connections and the only possible place to make these connections was in a height restricted area of the loft space. Using the Wago connectors and junction box made the work simple and safe. Excellent product for this work!
Great for multiple cables such as lighting junction boxes where you have loops switches etc and need a large box for terminating
The box accommodates a number of WAGO connector types. I also purchased 221 connectors to use with the box.
This larger box has 9 slots to slide wago connectors into. One issue I had was that the 221 connectors would not fit into 4 of the slots, and 1 was over size (see photo).
In the photo there are 4x 5way & 4x 3 way type 221 connectors. I managed to replace 2 old type 4 terminal lighting boxes and then feed 3 lights and switches from this box.
The easiest way to wire these boxes is to decide on the final position of the connectors being used, measure, prepare & terminate the cables outside of the box, Then set the black cable anchors and push the connectors and cables at the same time into the box.
Each slot that could hold 221 connectors, can hold a maximum of 6 terminals i.e. 3x 2way or 2x 3way or 1x 5way. The black cable clamps are easy to reposition. For those who check closely, I remembered after this photo was taken to place brown sleaves on the BLACK switch wires. Oh well, only had to open the clip.
larger version of the wago box, handy for bigger projects
Could do with a better description of this box - the picture is slightly misleading in that the of the 9 connector slots, 4 are only for 221 series connectors, 4 are only for 2273 series and the 9th can take either type of connector.
If you need a WAGO junction box for your WAGO connectors - its an obvious solution.
What a great product makes life a lot easier and safer. I now carry a few of these in on my van.
Large enough to take the 4 cables I was connecting, so made light work of the job.
