Fitted a Hansgrohe mixer. I purchased both a 3/8" isolator and these tail adaptors.
Once under the sink I had a choice of either using these, or turning off at the mains to fit new isolators. I chose the quick option.
Used the nut and olive that came with the new isolator, these nipped up to the existing 1/2" isolator and did the job perfectly. No leaks.
Could be doing with being a half inch longer to allow the olive to bite and for wrapping of it with PTFE tape before final assembly.
The current length is not enough once the serviceman valve nut is fitted.
Worked fine with a compression fitting. Connecting a 3/8" flexi to a 1/2" ball valve.
Just what I needed to connect taps boughtin France. But the plain tail is too short if you want to use compression fittings. No good with push fit fittings as no way of holding while tightening the threaded nut..
I went into store not being able to find what I needed through the app.
The staff were fantastic, above and beyond looking to accommodate and did so perfectly
10/10 for Witney Toolstation as usual
Does exactly what it says works well on taps from European suppliers
simple adaptors that are needed for Grohn taps to fit to UK pipe work
Must have for grohe tap to isolation valve. Very easy fit.
Decent quality brass adapter, which was perfect for adapting a European tap to work with UK pipework
Ordered online, super easy, collected the next day as I didn’t need it urgently, pick up was stress free and easy, far easier than their rival.
The product fitted like a dream and allowed me to fit my new kitchen mixer without much effort.
Perfect fit no issues easy job to fit 1/2 inch to 3/8
Made adaption to existing fittings so much easier.
Did the job perfectly , I’m not a plumber, but these were easy to insert and connect
Essential for connecting Euro connectors to metric pipework.
Needed to replace an old leaking tap with a new one.
Perfect for converting isolation valves to fit flexi tap connector
Excellent quality brass adaptoes and easy to install
Great little fitting ideal for taps that come with a 3/8” thread to adapt to 15mm
essential for some imported taps that have not been made UK spec
Great adaptors to protect the tap sealing washers. Assures a perfect joint!