Good quality product once installed, but putting it together is a proper pain. This is only reported by a few reviewers, so perhaps tolerances have changed? On the product page there is an instructional video which conveniently leaves out the process of sliding the brush into the rail, but this is the only part that is remotely difficult. For me it simply wouldn't slide in without all the brush binding up in the rail and jamming it. I had to widen the mouth of the track to get it in and even then half way down it got bound up again. 5 minutes to cut and screw in but half an hour faffing about trying to slide the brush on. I would buy again now I've figured out a good technique, but still giving it 2 stars because of this frustrating issue.
Very good, stayed on my garage door sor far, after 3 weeks of regular opening and closing. My garage feels less cold now. Would recommend it. Easy to fit.
This was kindly taken back into stock and refund issued as it was not required. Have used one previously and they are very good and hard wearing.
easy to fit, just right for the job. No more draughts.
Needed a long brush draft excluder to address a variable gap under a front door. Toolstation were the only local supplier with this product. Very easy to order and was available on the same afternoon. Picked up and completed the job in one afternoon.
Bought this as I needed a brush strip for a back door that needed longer than average bristle length than standard for a pedestrian door. Well made and has donethe job well. Not sure what to do with remainder yet !
Neat and easy to fit. So far, effective in keeping vermin and leaves out of the garage
Was not sure whether to go for the rubber seal or the brush which decided on buying. Worked out fine.
It’s a door brush, especially suited where the floor level changes as the door opens (as in my case)
Does the job brilliantly and very helpful friendly staff that helped with a smooth transaction
Excellent quality easy to put on and a good price will buy again
Bought this to cut down and fit on 3 outbuilding doors. All done easily, hacksaw to cut the metal fixing to size, then used pliers to cut the brush sections which makes sure the ends 'close' to keep the brush bristles in place.
Excellent product good value and you get 2mtr length so will do 2 doors . Used it on an external gate and it worked fine .
Just built some new gates and needed a flexible solution to the hinge edge. To stop draughts and peering eyes. Perfect and looks professional. Would recommend.
Good brush depth which stops unwanted debris into the property.
Good all round quality and easy to cut to size and keeps the draft out from my integral garage
I bought 2 of these to cover a wide gap above a double garage door. The first one went in easily, held in place with strips if masking tape then drilled the frame and screwed it on. However the 2nd one was almost impossible to get the brush to slide into the aluminium holder. This is mainly because strands of the brush pull into the groove and jam it. Eventually managed by filing the sharp edges off the end of the Ali putting regular doses of WD40 and hitting the end of the Ali housing with a soft faced hammer to drive it onto the brush. 1st one took about 30 minutes, second a couple of hours. They do work, garage is definitely warmer
Seems to work well, easy to fit. Its a shame it comes in 2 pieces as one length would be better.
This works very well, but sliding the brush strip into the fixing is quite difficult, so I eased the fixing open slightly, then all okay. Hence 4 star.
Easy to cut and keeps the draughts out but not the most attractive thing on the door :)
