Works well. It took a little longer than I expected to set, but to fair to the product, it was being used outside and the temperature was fairly cold.
I used this gel to seal some Pratley boxes which will be below ground with SWA to flex connections for path lights. Easy to mix and pours well to fill all voids. I used it on a cool day so took a bit longer to set than indicated on the box but great results for piece of mind that the connections are water proof.
Great product! Highly recommend will definitely buy again
Fantastic product did the job well. Took longer than suggested to set even though it was 25c but still perfect.
Easy to use, good value for money, has proved reliable
Ronseal, 'dose exactly what it says on the tin' nothing else to be said- brilliant.
This is amazing stuff, recommended by my electrician friend after a water main burst and flooded an underground junction box. I isolated the power, cleaned out the water, mixed the solution, and poured it. Set in just over 15 mins to form a gel. I needed 2 packets to ensure connections fully covered. Quite a price, but considering that I shall NEVER have problems again, worth every penny. Just wish the electrician had used it from the start, then there could have been no problem. Definitely recommended for any situation where an external box could possible meet water and trip a fuse.
Great water resistant gel for filling external connection boxes. Two part gel with mixing jug and stirrer.
Excellent product - I used is to fill outdoor junction boxes to ensure they were totally waterproof. Very easy to use - mix equal amounts of the two components, pour (the mix flowed very easily around the three connectors to form a level surface. Cured in 10 minutes. Perfect
Fantastic stuff. Nothing better on the market
brilliant and a must for any electrical joints outside
Its seems to do the job and joints trip free but its very expensive and wont fill many joint boxes with it
Excellent product easy to use and does what it says
Little bit pricey. Use this stuff all the time. Easy to use and works perfectly. Setting time is considerably longer in the cold though.
Ray Tech magic gel. Far better than the equivalent Wiska brand stuff you get from TLC. When mixed correctly the viscosity of this product remains thin until around 5 minutes after mixing. Get all your enclosures prepped and get your running shoes on!... Alternatively mix it in 1/4 litre amounts. Because of the low viscosity it fills the boxes better than the other products of similar nature therefore is less likely to cause issues later. Once it begins to congeal it is fit for purpose in about 25 minutes
Good seal for outdoor lighting electrical connections but expensive.
Used to fill external junction boxes to stop water ingress
I'm a DIY-er who needed to add waterproofing to professionally installed wiring before burying it. Easy to use.
Easy to mix,unlike some similar products on market,filled up some IP66 "bricklights' which were sited under ground,also an IP66 junction box,as av"belt and braces aproach,of course it hasn't rained since !,looks as tho it will do a good job ,b........u expensive tho!
After removing a broken lamppost in a car park I had to leave a junction box buried with live connections. The box was IP rated but without the Power Gel I would have had loads of trouble in the future. I am now happy that the connections will not get wet even after heavy downpour.
