Does what is says on the tin.......................
Plus, nice finish, minus, take’s ages to dry
Make sure to wear a mask
I used this paint on a motorcycle frame. It gives a high gloss shine and covers well.
Ordered the black spray paint online it showed 2 in stock drove to the store to collect but the can had a white lid, the salesman tested and yes it was white. No alternative to be offered so had to go elsewhere. Was of time and money travelling to the store. The clue is in the can by the colour of the lid for goodness sake
Used to smarten up golf ball washers on golf course excellent product with good coverage and adhesion would buy again
Did the job perfect, had some metal shelving brackets I wanted to spray black. Came out out a lovely finish no drips or anything. Easy to use just don’t get it on your clothes!
I used the black spray paint to partly refurbish a squat stand it came out really well
This was ordered for my work company.
I asked to collect In store and it was sent to my home address to be signed for while I was at work
Great product and competitive prices. Worked really well on the job I wanted it for
This is a good spray but a word of warning. Do not use this as a primer only as it chemically reacts instantly with top coat paint and strips everything.
Great coverage, nice finish to tidy up a snag list on a job. 👍
I used this black spray paint to repaint a garden gate. Covered the old metal perfectly . The gate now looks like new. Definitely recommend this paint.
Excellent product if you have prepared your surface well the finish is brilliant. I found best results by applying a double coat .
For better results use a undercoat.
Great product. Goes on well and a great finish. Revommended.
Really great coverage and finish ,used on a motorcycle frame
Recommend this paint for aluminiun cycle frames. Easy to apply, good gloss finish.
Good paint, not far off a gloss powder coat finish. No idea if it'll be resistant to chip.
Cap will clog easily, definitely needs clearing with an upside down can after every use
Does what is says on the tin tom coin a phrase, gives a plastic coating which is reasonably hard wearing for my wheel nuts
A simple job of spraying an old motorcycle filter case with black gloss. Prepped and cleaned. But sadly initially the spray came out a bit blotchy. let each coat dry over 24 hours, 3 light coats later plus a thicker 4th coat. It’s okay but not perfect in places. I had better results with Hammerite Gloss but it takes too long to cure. It’s a balancing act. I wouldn’t buy this product again.
Plastikote is great at covering and not being bothered by stone chip
