Cut through 20mm porcelain tiles over 10 meters to enable an aco drain to be fitted and the cut was clean and precise… turned out a very nice job !
Only needed to cut a few tiles and did the job well
Disc required for cutting 20mm porcelain slabs and porcelain wall tiles. I tried other discs but this produced the cleanest cut with no vibration. Just cut slowly to prevent heat buildup. I cut the initial line on the tile surface of the tile making sure that both ends were cut to full depth, this prevents the corner from snapping. Then cut along the line twice to complete the cut. The wall tiles weren’t as thick so managed a single full depth cut. I bought a spare disc but it wasn’t required.
Might be a diamond blade but it wears out far too quick when cutting porcelain
This disc is designed for the job and cuts through porcelain tiles like a hot knife through butter
Brought for cutting glazed porcelain. Worked a treat just take time cutting and make sure the blade is in the right way round cuts very nicely.
Gave this to my landscaper and he said its the best blade he's used
Great for making smaller and tight radius cuts on 20mm porcelain tiles where the 300mm blade couldn’t go.
Great.
Cuts through my 20mm porcelain slabs with ease
This blade cuts quick and clean, even on super hard 20mm Porcelain tiles.
Really clean cut, very pleased with the results. Would recommend it for tile work
Really a good disc for porcelain tiles haven't found a better one yet
Great value and performs very well nice neat cuts on ceramic and porcelain
I bought a similar blade from a specialist tiling wholesaler for £38 plus vat , this blade was equally as good if not better
Great blade which lasts well if used carefully. Will distort if too hot so take a break between long cuts. Very good.
It's ok. It does cut porcelain. I was looking for a clean chip free finish for envelope cuts on a shower tray. The Abracs blade for £9.99 did a much cleaner cut. Unfortunately I didn't discover this without using the blade first, so now I can't return the MST blade. I'll save it for rough cutting.
Brilliant tile cutting disc, just what I needed to do the job
Not bad, now can i have the £100 you keep enticing me with to leave reviews
