Fitted a couple of these to a pair of entrance gates along with some Old Hill door studs and grab bars from Toolstation. Good quality and very good value, as most of the Old Hill range seems to be.
You may find that the threaded rods that screws into the rear of the lion head may end up a little wonky, once attached bend them straight and parallel before marking and drilling the holes through your door.
Very poor quality, chipped and touched up .Staff in store were not interested and suggested I call the customer service. Overall a very disappointing level of customer service.
Good knocker, with fittings supplied
I purchased a couple of Old Hill Ironworks products and they both suffer from quality. OK they are not the most expensive bits of kit but no means the cheapest. The alignment of the screws/bolts into the knocker is slightly out meaning that if you drill perfectly straight holes - which anyone would expect - then when you hang it, it is slightly off kilter. As I had problems with the quality of the threads on another Old Hill product, I wasn't confident enough to really give the bolts a good tightening.
