Motul DOT 3 & 4 Brake Fluid 0.5L

\n\t\t\tMotul DOT 3 & 4 Brake Fluid 0.5L

\n\t\t\t
• \n\t\t\t\tPerfectly neutral with seals used in braking systems
\n\t\t\t
• \n\t\t\t\tAnti-corrosion
\n\t\t\t
• \n\t\t\t\tVery good thermal resistance and stability
\n\t\t

\n\t\t\t
\n\t\t\tThe Motul DOT 3 & 4 Brake Fluid 0.5L is 100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems meeting DOT 4 and DOT 3 manufacturers’ recommendations.

\n\t\t\tPERFORMANCE 

\n\t\t\tSTANDARDS FMVSS 116 DOT 4 and DOT 3 SAE J 1703 ISO 4925 (3 & 4) 

\n\t\t\tThe typical dry boiling point (245°C / 473°F), superior to DOT 3 conventional fluids (205°C / 401°F mini) and DOT 4 (230°C / 466°F) enables an effective brake even under extreme conditions. Security: The typical wet boiling point (160°C / 320°F), superior to DOT 3 conventional fluids (140°C / 284°F mini) and DOT 4 ( 155°C / 311°F) enables to use the product longer. Indeed, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduce their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use.  Anti-corrosion. ) 

\n\t\t\tRECOMMENDATIONS 

\n\t\t\tMixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to avoid absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. For safety advice, draining once a year is recommended.