Was easy to fit with a T section. Has done what I wanted it to do.
Easy to instal and is working to reduce shock on water filter
Had water hammer from pipework behind kitchen cabinet every time any tap was turned off, toilet was flushed or washing machine was going through its cycle, fitted one of these and water hammer ceased, easy to fit using 15mm-15mm-1/2” BSP tee.
Nice and compact, decent build quality and a competitive price. Staff aren’t bad either 🤭
So good that I bought two, stopped my pipes banging straight away, highly recommended
i would suggest this whoever gets problem in their cold water feed, pretty amazing result
These Mini Testers are good, but the previous unit, bought from Toolstation lasted three years. This item will stop water hammer, especially on modern washing machines, with multi water fill cycles. The unit supplied is shorter, no longer a copper outer and not 170mm long, as per the Toolstation item description. Hopefully, this unit will beat the previous one for longevity.
Solved my water hammer on the cold water supply successfully, great.
Great product easy to install hammer disappeared instantly
Mini rester worked well, stopping pipe hammer to flexible hoses. It has been in place for 6 months and is still working fine
Did reduce the noise on mix of copper and plastic plumbing to a toilet but not a lot. Can still hear the banging!
Following some recent re-routing of bathroom pipes ended up with some hammering. New flow down so lifting not an option. Installed a pair of these (hot & cold system) - sorted absolutely brilliant
Bought to try and eliminate the water banging when taps turned on/off on a property but it did not work.
Installed for a week, has stopped the hammer/banging pipes from the dishwasher and washing machine when the valves close (when filling). Job done!
Easy to fit with the 't' and very effective. I changed the kitchen taps recently and realised that I had not fitted support clips to the pipes as I should have done when I did an overhaul and update of the kitchen in 2007. I fitted the clips. The next morning around 0500 hrs I was woken by horrendous pipe banging. I traced it to the washing machine doing a timer start up. It seemed likely that previously without the clips the natural movement and spring in the pipe work had been sufficient to damp the cold water feed back on a relatively new washing machine which has a very sharp cut off valve. I have also fitted full flow lever type isolation valves (much easier to operate) to replace the old type screw driver slot variety and a non return valve in the mains water feed to bring the system up to date.
Sadly this did not work at all. I purchased a Flomasta VAH0368 that is larger and must have a bigger bladder and that worked fine. Can I get this refunded?
Good value, easy to fit (remember to buy a tee), only 4 stars at the moment as not be fitted long.
Excellent service and product at a great price, better price than competitors
These things really work! Already installed three following a house renovation left us with water hammer from our washing machine, dishwasher and a toilet cistern. Now plumbing the last ensuite myself and am installing the rester from the outset.
Finally fixed my water hammer problem. Silenced a VERY loud water hammer.