A good value ,good quality hole cutter. Sharp and quick leaving a good clean hole
It is only last long up to 5 holes of 20mm thick slabs or tiles
I needed to drill a hole in my flush tank to connect the toilet rim to exaust fan. I bought Mexco dimond hole saw and did a perfect job.
Returned on the counter at the time of collection. No arbour, this is an extra. Looked too small a diameter for the waste pipe to pass through. An alternative sourced with a built-in drive, for a similar price to what an arbour would have cost.
Good cutting effect but burnt a bit, could have been a bit coarser!
Great for the money and does the job well. Would buy again
Absolutely perfect for porcelain tiles with no effort at all
Used this with the M 14 adapter in a 18v drill. Bit nervous because the description said to use corded drill. But the hole saw worked really well. I had two holes to drill on the same tile and it was fine.
Little tip I started the process using a separate small drill. Once the indent was started transferred over to the adapter. Then once the ring of the saw was formed, remove the pilot drill for the adapter using the hole saw on it’s own. Would recommend the saw. Looks like it still has life in it.
Apprehensive about using the hole saw but sailed through the job. Only cut a couple of holes but still looks in good condition. Used with a water spray to keep cool. Good tool
Used to drill a hole in granite quarry tiles (epoxied to a plywood worktop) which are extremely hard to cut without chipping or cracking. Needed to make a hole to fit a tap to the worktop. The hole saw fitted easily to a reqular angle grinder and was very easy to control to get the hole in the right position. Cut through the worktop in a couple of seconds - perfect, good clean finish, literally made a job I was dreading an absolute breeze. Excellent value even though so far only used once, and looks good as new for the next time I need it.
Cut tiles perfectly to fit bath room taps thorough the wall
This thing cuts through anything Marble porcelain tiles
Fast cutting and have lasted well , not the cheapest but well worth the ones so far
I cut through porcelain tile not to much efforts, reasonable price.
I install many bathrooms with porcelain tiles and they are tough - I used to burn out loads of drill / holesaws however this one has been amazing , 8 holes in and it looks like it is unused - amazing
Bought this to cut a particularly difficult area out of the inside of 20mm porcelain patio slab, as discs were cracking the slab. Worked an absolute treat when combined with a bit of a self made water saw to using a dribble from a hose.
Great price and product, does what its suppose to do
Good stuff, strong diamond teeth and useful on opening different sizes
Good tool but be aware if you are cutting 20mm porcelain tiles you will be lucky to get 10 good holes with this tool
Does what it says on the tin I used it to cut a hole in a ceramic sink, expensive but worth paying the money
