Makita DTW300RTJ 18v LXT Brushless 1/2" Impact Wrench Inc 2x 5.0Ah Batts

Makita DTW300RTJ 18v LXT Brushless 1/2" Impact Wrench inc 2x BL1850B 5.0Ah Batteries, DC18RC Charger and Makpac Type 2 Carry Case

The Makita DTW300 is a cordless 1/2 inch impact wrench powered by a single 18V LXT Li-Ion battery. This DTW300 provides improved fastening control - ideal for automotive, installation, and fabrication trades. The DTW300 impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 330Nm of Max Torque and 580Nm of Nut-Busting Torque.

Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed.

The DTW300RTJ features Makita''s Extreme Protection Technology (XPT™), a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

FEATURES

\n
• Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
\n
• The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
\n
• 3 forward and 3 reverse Auto-Stop modes for increased efficiency
\n
• 4 Stage power selection for optimum rpm and fastening torque
\n
• 330 Nm of Max Torque and 580 Nm of Nut-Busting Torque
\n
• XPT technology that protects against dust & moisture
\n
• LED Job light with pre-glow and after-glow functions
\n
• Compact and ergonomic design at only 144 mm long
\n
• Rubberised soft grip provides increased comfort on the job
\n
• Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
\n

SPECIFICATION

\n
• Voltage: 18v LXT
\n
• Driving Shank: 1/2" Square
\n
• Max. Fastening Torque: 330 Nm
\n
• Nut Busting Torque: 580 Nm
\n
• Blows per Minute (Hi): 0 - 3400 ipm
\n
• Blows per Minute (Med): 0 - 2600 ipm
\n
• Blows per Minute (Lo): 0 - 1800 ipm
\n
• Standard Bolt: M10 - M20
\n
• High Tensile Bolt: M10 - M16
\n
• No Load Speed (Max): 0 - 3200 rpm
\n
• No Load Speed (Hard): 0 - 2600 rpm
\n
• No Load Speed (Med): 0 - 1800 rpm
\n
• No Load Speed (Soft): 0 - 1000 rpm
\n
• Net Weight: 1.5 - 1.8 kg
\n

NOISE & VIBRATION

\n
• Noise Sound Pressure: 97 dB(A)
\n
• Noise Sound Power: 108 dB(A)
\n
• Noise K Factor: 3 dB(A)
\n
• Vibration Fastening Bolt: 12.5 m/sec²
\n
• Vibration K Factor: 1.5 m/sec²
\n