Easy fit radiator extension tails. Ideal when replacing an imperial radiator with a metric size one. I like to buy this size so I can cut them to the exact length I require.
For me out of a tricky spot when replacing a radiator with a smaller sized radiator and could not move the tails. Easy to cut to correct length with pipe cutter
It did as advertised and could easily be cut with a pipe cutter.
Bought these to fit and metric size radiator, where the existing pipework was to short.Very easy to fit and cut to size with a pipe slice .excellent value as these are a lot cheaper than renewing the pipework
Replaced a very old imperial sized rad with a modern equivalent and used a pair of these to make up the difference in the spacings. Cut easily with a pipe slice and, tightened up to a drip-free fit first time.
This is an ideal fitting to use when the radiator is slightly smaller in width and it can be easily cut to length to suit and it also has a good depth of thread to screw into the radiator to avoid unwanted leaks.
Works fine, no problems fitting seems reasonable quality. Let see if it still looks as good when it gets older.
Fit for purpose at a good price. Didn't cut it down but can't see why they couldn't be if required
These valve extentions were ideal for fitting a smaller radiator
Must have. Great quality. Will buy again. Many thanks!
Does the job and can be trimmed down to size with pipe cutter if required
I quite often use these when replacing rads, always keep a couple in the toolbag , get the 100mm ones then cut them down to the size required
Did the job I needed it for. Fitted it within minutes.
Needed these as the replacement radiator was a little different from the old one. Using these and cutting to the required length made the job much easier.
Perfect length for when i was replacing my radiator, and no leaks so far!
Worked perfectly and got me out of a fix, after discovering that the radiator in my bathroom was an old imperial radiator I bought some of these to allow for the difference in size and it worked perfectly, the only minor issue was that I had to wrap quite a lot of PTFE tape around the threads but it was no biggy
Bought a double radiator that was slightly shorter so these were ideal,
This finger tightened into the radiator with 20 wraps of PTFE and of course leaked. Not tapered. Avoid.
Bought this as my replacement radiator is a bit shorter than the original one. This valve extension is very reasonably priced and cuts easily to length with a copper pipe cutter. So I recommend it, and the price is very reasonable.
Solid and Reliable Radiator Valve Extension
The Made4Trade Rigid Radiator Valve Extension is a dependable solution for extending radiator valves by 100mm. The build quality is solid and durable, ensuring a secure, leak-free connection, even in high-pressure systems. Its 1/2" x 15mm size fits standard radiator valves perfectly, making installation easy and hassle-free.
The extension also has a good finish, which blends well with most radiator setups. This piece is ideal for those needing extra reach to fit between pipework and radiators in tricky spots. Overall, a practical, cost-effective addition for any DIY or professional plumbing job.
