Leica Lino ML180 Self-Levelling Red Multi-Line Laser (20m - 100m)

The Leica ML180 Remote Control 90º Layout Laser Level is a 90° cross line laser level, with 4 laser lines, 4 cross points and a plumb down point conveniently set to the outside of the tool for easy access.

The receiver beeps to indicate that you are close to or directly in line with the laser beam. The big difference here is that the XCR Catch operates like a remote control and automatically catches the beam with the Smart Targeting function. By holding down the right and left arrow buttons you can spin the ML180 on a horizontal axis of +/-4°.

This is great when working alone, outside and at long distances (up to 50m). Simply get the laser close to your target and then micro adjust remotely to get it right where you want it or use the automatic alignment function Smart Targeting. Perfect for lining up at a 90° angle with the corners of existing structures or laying out walls.

The Leica Lino ML180 can be used with a rechargeable battery pack or alkaline batteries. This provides maximum flexibility and ensures it is always ready for use. The tool can also still be used while being charged.

Using the plumb dot, you can set up the Leica Lino over a desired point. The plumb beam is offset to the corner of the tool, so can be quickly and easily set up over markings, including those close to walls.

The XCR Catch features a large reception window located on either side of the laser receiver so laser lines can be detected very quickly. The receiver display is on both sides of the device so that the position of the laser line can be read from different working positions.

Features include a +/-5° self-levelling range, working range of up to 100m with receiver at the centre of the line, levelling accuracy of +/-0.7mm @ 10m.-10°C to 45°C operating temperature range, 1/4" tripod thread, requires 2 x 1.5v D batteries, 10 hours run time on alkaline batteries, 12 hours on rechargeable batteries.