| Brand | Integral |
| Colour | White |
| Energy Efficiency Rating | F |
| Installation Area | Indoor |
| IP Rating | IP20 |
| Item Diameter | 220mm |
| Item Height | 15mm |
| Item Weight | 430g |
| Light Colour | White |
| Lighting Technology | LED |
| Material | Aluminium |
| MPN | ILDL20565M001 |
| Power Consumption | 18 W |
| Type | Downlighter |
| Voltage | 230 V |
Great slimline LED light - we used two of these in an under stairs cupboard and the light temperature and brightness are excellent for this.
Easier to fit than I realised on ordering as the clip in bracket simply removes and you can screw direct to the wall/ceiling with suitable support and just needed a cut out for the wiring to come through the plasterboard.
It is a very small profile so the light doesn't intrude into the headspace either - ideal for those places where headroom is limited or you want it to be unobtrusive.
Once the external bevel is fitted it is a great flush fit to the ceiling and looks smart, clean and perfect for the job.
I fitted this with an external PIR sensor as the item with one included was not available to order and this works perfectly.
Great product, easy fit and super bright. All done in 10 minutes!! Perfect
Great little light. Handy fittng options. Nice to be able to select the brightness levels. Will definitely be getting some more as they fit nicely in cupboards and wardrobes
Nice compact sized basic LED lamp. Used as replacement for inset down lighter. It does have a removable bezel (behind which is the light intensity adjustment switch) but it's a poor design and a bit of a struggle to remove before the lamp is mounted, let alone once it's been mounted. Otherwise it illuminates well without protruding much.
Super slim line and versatile with settings to allow different lux levels available and different sensor levels. Easy to fit.
Easy to fit, quite bright , but switchable intensity
I required an inexpensive equivalent replacement light for the stairwell in my home. This unit I sourced from Toolstation fitted the bill perfectly in terms of cost, availability, ease of installation and performance. I can recommend this product
Fit was simple, result was excellent. Light output on lower setting was more than enough for closet toilet.
Great unit easy to fix. Found the 10watt really quite bright.
Simple clean lines, flush fitting landing ceiling light.
An excellent ceiling light, used to supplemnt an older type light in our utility room/conservatory, in Freshwater, Isle of Wight. Just what was requred and adjustabel wattage proved useful. I would recommend
great looking fitting and light very bright but diffused softly ,only draw back is space on top for cabling if surface mounting ,as i had an older property lots of cabling through joist on ceiling rose was hoping it would fit over but didnt so put a little spacer in but obviuosly this left a slace for dust and spiders lol but if on newer build with space to tuck cables up or refit over exisitng smaller downlight hole then its great
Neat unit to replace a failed DD fluorescent fitting. Though I didn't use the recessed fitting this is a neat solution to different sized holes
Easy to fit , bright light on lowest setting, quick delivery
Easy and quick to fit with no problems and gives good bright light. Ensure you set the required wattage BEFORE you fit the bezel rim. It's a pain to get off even before you fit the light, after fitting the light and the bezel it's almost impossible.
Have had to dial back the light setting as it is too bright for a small kitchen on the highest one. Easy to fit once you have managed to prise off the cover. Couldn't find the brightness setting at first because it's so small. Would buy again.
Nicely made product. Slim profile perfect for a low ceiling room. Very easy to install and excellent amount of light even on lowest setting. Good value for the money.
Great product works well very bright and easy to fit only took 15 mins to replace old light fitting.
Nice light, very bright for the wattage.
I'm using it to replace a recessed fluorescent downlight, by sealing the cut out and surface mounting the fitting to eliminate draughts and insulate above. It's ideal for this.
Only small points are it's very difficult to remove the bezel to adjust the wattage and it's very difficult to fit the light on the bracket and turn it to lock it in place. I feel this could be made easier which would mean I would have given it 5 stars.
