I needed to replace runners on a set of kitchen cabinet drawers and purchased these previously for another drawer where the runners had failed. These are easy to install and fitted the drawers perfectly giving smooth action. Would recommend for drawers other than cutlery drawers where extra weight is present.
Dimensions are a bit hazy, so to be (fairly) clear, this 310mm runner is 310mm long on both carcass section and drawer section, 17mm high, and approx 9mm thick. Drawer 'pull out' or extension in excess of 400mm is possible because the two runner halves slide past each other in both directions i.e. if (1) the thinner runner is screwed to the carcass with one end flush at the front of the cupboard, then (2) the wider runner is fixed on the side of the drawer but not at the front instead towards the back of the drawer, then the drawer can move forward out of the carcass by more than 310mm. (on my unit I set it for around 360mm pull out, but it depends on your drawer length. Note the more pull-out you allow, the less weight the runner will support).
Note also, the wider drawer-side runner is fixed with a threaded bolt (machine screw, supplied) from inside the drawer.
My drawer side slot was 27mm high, so this 17mm high runner was fixed at the top of that slot. I was going to fit a 10mm wooden packer strip under the runner, but that wasn't found necessary, it was stable enough with the drawer slot resting on the top of the runner.
Replaced old broken ones on daughters chest of drawers
Replacement for a broken drawer runner. Same length but narrower in width. Still did the job OK though, if you position it at the top of drawer rebate and fit runner to match on side of carcass.
Decent kit, very easy to fit. Check the depth of the groove in your drawer first!
Good value for money, easy to fix, quick collection
Was a direct replacement for a worn out part from an Argos bedside drawers.
Replaced drawer runners on old cheap pine chest of drawers for a new lease of life and saved having to replace the whole thing. Easy job for diy.
Excellent product. Exactly what I needed, as these are a few mm longer than the previous worn out runners, and as such, let the drawers pull out that little bit further, Good to know that all screws and fittings are supplied in the package as well
Perfect item , just what i needed and works flawlessly, really good price too
Good quality products. The staff are are amazing and helpful
The product was in stock at a very fair price, I collected it, and it fitted the drawer perfectly.
I was very impressed with the gentleman who served me. He was very kind and helpful. The item is great too.
Needed to replace 1runner on drawers after moving house as one got damaged got one from toolstation the next day fitted it and was perfect
Good, value product. Easy to replace old runners.
Ideal replacement for the original fittings. It’s a shame they were a bit shorter than the originals but not a huge issue. Comes with clear instructions and all the screws required.
Worth the price, cheaper than buying new furniture, but they only last a few years.
Only really good for the lightest of drawers carrying the lightest of stuff, just about up to the job. Personally I'd look at getting something beefier.
They replaced broken ones and they work well and easy to replace
These fit and do the job as replacements, but are not very strong and if there is much weight in the drawer, will in time be bent and the bearings will fall out.
