Does what it says on the tin. Seems well made and nice quality, pipe was easy enough to solder to. Tap fitted just about straight (with fixing holes symmetrical) when tightened onto thread with enough thread seal tape.
Good option to install an outside tap. Easy to install, esoecially if plastic speedfit is used. My walls are very thick, so the extra length of this pipe was good.
Happy customer with no issues. I would buy this again as required
Bought similar from another know shop and they all leaked, this is my 4th from Toolstation and no longer need to test before fitting, very happy
This is a good idea but it needs to be longer to use on a cavity wall, I had to extend it to be able to get a fitting on it. 100mm longer would be better, you can always cut it down. Also it could do with flat parts on the round boss as you can’t get a spanner or grips to hold it while tightening the tap.
Great kit to use when you are putting up an outdoor tap. It had a flange so you can secure it to the wall and then screw the tap straight to it.
Good bib tap wall plate and pipe. Brass is a decent thickness.
Good for new outside tap through existing hole. Worked well.
Excellent product and very reasonably priced. Would recommend
Just what I needed quick and easy to use saved time and energy
Exactly as picture shows - makes a quick easy and tidy job.
Useful and neat fitting for installing an outside tap
Reasonable product. Fitted well and reasonable price. Would buy again. As a fitting tip, fit the tap onto the wall-plate before drilling any holes. Use a fibre washer between the wall-plate and tap, and/or PTFE tape an/or potable non-setting plumbing sealing compound. Crank the joint nice and tight, then.... position the wall-plate in order to drill the screw-holes. This avoids the possibility of drilling the holes first, and then later finding the tap ends up at a weird angle. The answer to that of course is fiddling with additional fibre washers
Great product product will definitely use again highly recommended
Handy little bracket although the backplate could be bigger.
I used this to replace old outside tap mounted on a wallplate elbow. I used about 15 wraps of ptfe tape. That gave a firm seal on an upright tap without having to force it on.
Bought this to replace one that had been in a few years and developed a pinhole. Easy fix as it was connected using push fit connector so all i did was cut to length. Important to wrap the copper pipe in pvc tape to protect it as it passes through the wall. Very quick, great solution
Great quality wall plate and very quick & easy to fit. All pipework are hidden making for a much cleaner look to my outside tap.
Can’t go wrong, does what it says on the tin. Good product.
Excellent peoduct, exactly as it said on thr website.
