Perfect for my needs saved doing a million u-bends under the sink perfect as a temporary measure while altering my kitchen sink location
Has both 32mm and 40mm ends just cut off to suit your application.
Works with push fit fittings and provides a quality seal. Ideal for awkward spaces and recessed shower wastes.
Very helpful shop assistant, showed her photo of my waste/pipework she guided me through what products would best fit 👍
Good product for 40mm pipework, as you can if needed remove the full outlet end adaptor assembly, and connect straight onto a standard compression fitting, either a straight connector or an elbow.
I'd be a bit doubtful about using it on 32mm pipework however, as the bigger diameter could leave a dead area where soap scum could build up and potentially smell.
I’ve bought two of these, the long and the short versions. The concept is brilliant and can get you out of trouble. However, I threw the long one away as it just wouldn’t seal properly at the spigot end. Persevered with the short one, but had to seal the spigot end with silicon. Felt like I was bodgin’ the job.
Potentially a useful item but wall thickness of spigot ends is quite thick and as a result it was not compatible with the waste fittings I was using.
Useful and solved my problem nicely without having to buy multiple items. Have to cut off the 32mm end sections to use on 40mm fittings.
Flexible waste pipe is very flexible and doesnt leak
Does what it says on the tin. I’ve been using these for a couple of years now and as long as they’re fitted the right way the will last.
Does what it says, seems like a fairly good quality but of kit.
Used it for a dishwasher waste in new kitchen, very useful
Needed to re-route the kitchen waste pipe, it was a tight squeeze, but it got the job done
If you are not a plumper this item is a great option. I accounted all "L" and "T" connectors but I couldn't make them fit. I solve the problem with this flexible item :)
Good price and saves a lot of faffing with fixed angle joints. Wouldn't use outside as it isn't that robust. Excellent for kitchen/utility wastes.
Recommended.
Once cut down it certainly isn't 40mm. Packed the rubber out with plenty of ptfe and it isn't leaking.
Description says it works both as 32 & 40mm, how does that work? Well, each end is 32mm and a few inches further up it widens to 40mm, so if you need it as 40mm you just saw off the 32mm portion. Exact diameter is somewhere between 40 & 41mm, not to be confused with imperial 1½" which is closer to 38mm
Exactly what I needed to plumb a waste pipe in a tight location which didn't have enough room for the compression fittings/elbows I was planning to use. Only down-side is that it isn't really compatible with compression fittings due to the design of the ends... something which isn't clear in the product listing (which claims to be 'universal') - these are removable which allowed me to thread the flexi pipe straight onto a compression elbow, with plenty of PTFE tape. The seal seem water-tight for now - hopefully it stays that way!
Just what I needed for a back to wall bidet, I.e. tighten waste joints, flexi tap connectors & push the bidet back to the wall… but the flexi waste was too wide/big so could not be used. Item was returned no problem.
Well made quality waste,good price,had no problems all good.
