Einhell 2000W 250mm Table Saw 230V

Работи отлично и съм много доволен от покупката си

needs a soft start, table jumps when started. could do with a better mitre fence.Have made one.

The base is plastic so a bit flimsy. It gives a kick when it starts up. The instructions aren't the best. Cuts well and you can adjust the height and angle of the blade. The dust extraction is ok with a cordless vacuum, it might be better with a proper dust extractor vacuum.

Saw this at the clearance price & it was too good to pass up. An absolute steal at the price. Easy to assemble, the instructions are a bit of a shambles but it’s easy enough to figure out. It’s very sturdy but light enough to move around easily. I’ve been using it to skim the rough surface off reclaimed pallet wood (just the blade width) & it’s flying through the job which is gonna cut down the sanding time by hours. Absolutely perfect for the DIYer, I am over the moon.

Great cuts, easy assemble, sturdy, great table saw

Assembly was straightforward, and the table feels sturdy and secure when erected. Cuts well, with no vibration, though is a little noisy and dust extraction is poor. More dust on the floor than collected!

wanted onefor some time but did not have the room to keep it new shed and new saw worked well instructions not very good but easy enough to work out where everything fits
good clean cuts and with a 3 inch cut it does what i want out of it

Overall for the price it's a good bit of kit. My only criticism is that the mitre slots are only 15mm and not standard size of 19mm so you are unable to upgrade the mitre guage to an after market one without modifying / replacing the bar it sits on. Other than that, out of the box cuts straight(I have upgraded the blade to a higher tooth one). Will hold 90°/ 45° for multiple cuts, easy to adjust multifunctional dial for height and cutting angle.

Дддддддддддддддддггггггггггггггггггммммммммммннйхх

Poor assembly instructions don't help at all. What should have been a straightforward task turned out to be an impossibility. A box of fittings was wedged between the table and the motor housing, resulting in having to remove the table to extract them and various components dropping out. No guidance to re-assemble. I'm no novice, but gave up after 2 attempts and returned the product. The box had previously been opened and repacked untidily, so presumably someone else came to the same conclusion.

The saw was easily assembled, but the instructions for calibrating the saw are poor.
Have made some test cuts and happy enough with the saw.

Zaag werkt prima, goede aanslag, voldoet prima aan mijn wensen.

I've had my saw for 3 years now and you can't fault the motor or its cutting ability. Sadly though the construction rather let's it down. Within the first month of use, the plastic cover around the blade and over the motor was cracked. This should be made of metal. All the cutting adjustments and fence fittings are "approximate". By this i mean that to make accurate cuts you need to use a square and make manual adjustments each time you use it. ( The same is true of their Chop Saw, although this is better made. ) The worst problem - and the reason for this review- is that I have discovered today that the mechanism for raising and lowering the blade is jammed. Upon examination, I have discovered that the gearing is made from some kind of hard nylon and has stripped. These ideally should be of alloy. I can still use it, but am unable to lower or raise the blade from it current position. I'm looking for a replacement, but it won't be Einhell again.

Arrived well packaged. Not too difficult to assemble. It is very loud, and I suspect neighbours would complain if I used the saw regularly. The clear guard over the blade is a nuisance. I presume it should stay up when lifted but it doesn't, so unable to see any markings on the wood.

I have been using this for about 6 months for all types of woods both soft and hard. The saw has never struggled to cut what ever I have asked it to. I have found 2, maybe 3, draw backs. 1. The accessory slots that you would slide the mitre gauge in or a cross cut sled are NOT a standard size so most aftermarket accessories are no good. 2. The fence has some play in it as it is only fixed at one end which makes cutting anything Square really difficult. 🤔
Apart from these 2 issues I have no complaints especially as it was well priced. I am just starting out with woodwork without a huge buget and suspect many people who opt for this saw will be in the same boat but I have found the 2 issues have made it more difficult than if they were resolved.
Generally I like einhell tools and have a few others so I won't say don't buy it but it might make your life a bit easier if you bought a saw that had better solutions for the points above.

Simple to assemble and easy to follow instructions. Completed task purchased for easily. Fair price.Would recommend.

I'm an entry level novice and bought this as it seemed not much more than a decent mitre saw. Fast assembly if you've got common sense, the instructions are all photos in black and white. Not the best I have to admit, but as long as you keep checking the photos it gets there easily. Very sturdy. Extension plates aren't level and you'll have to fettle a bit. Others have commented on adjusting the blade but mine seems fine from the box. The plastic guard is a nightmare when in use. I've removed it as it obscured line sight so you end up having to bend to look near the wood which defeats the guards job. I just take extra care to keep limbs away from blade. Very loud machine. You'll want good neighbours and ear defenders.

Value for money with a good cut easy to put together.

Great table saw, easy to assemble, good clean cut.

Great for the weekend warrior. A bit fiddly to assemble but worth the effort. I little bit of fettling and accurate cuts each time.