Had to replace a cheap regulator which leaked, well made does the job .
Worked perfectly for supply to HVLP paint spray gun, decent quality, stable output.
Bought this item to perform some spray work on house radiators (to regulate and filter the air pressure to my spray gun).
Works perfectly well, and although the quality isn't up to the more expensive ones made by Devilbiss etc, it is perfectly adequate for DIY spraying.
Simple to install and set with clear scale on the pressure gauge
Excellent price and super fast delivery Thank you
Average to low quality but seems to work. Threads need a healthy load of ptfe tape to make airtight
It works but the relief valve at bottom lets by and you have to jiggle it often to stop the air leaking. Major design flaw since it is made for high pressure air.
I am happy with this item even though there was a minor problem in that when I swapped the gauge to the opposite side of the regulator the gauge did not work.
Rather that take the regulator back I removed the gauge to see if the airway was blocked by sealing compound and discovered there was no airway.
After fitting soft jaws to the bench vice, I clamped the adjustment knob hex body in the vice and used hand pressure to unscrew the regulator knob.
With the knob removed, I could see the top of 3 airways and a quick probe with a small panel pin showed one was not fully drilled.
So, out with the battery drill and a 1.5 mm drill bit and the problem was sorted.
Seems to work well, doesn't leak when pressurized but when compressor is building pressure it leaks for a few seconds, otherwise wouldve been 5 stars
Bought this for a spray job I had to do. It's very well made and works perfectly. What more do you want.
Not a lot of reviews so add mine
Bought this as robust not plastic a bit dearer than famous
Website but mostly plastic and reports of leaks paid a bit
More fore solid build and well worth it works perfect no leaks
And would withstand a fair knock or two would recommend
And good service click and collect at Toolstation
Can now carry on with trying out hobby airbrush 10___60 psi
I have had this unit for about three weeks and am very pleased with it. It’s very robust and well made I would recommend this to anyone!
