| Brand | Bosch |
| Item Depth | 1cm |
| Item Diameter | 7 mm |
| Item Height | 18cm |
| Item Weight | 100g |
| Model | Bosch |
| MPN | 2608900591 |
| Number of Items in Set | 1 |
| Suitable For | Drill |
| Type | Drill Bit |
I would say this is good for about 4 or 5 holes. Even then it takes lots of patience, water and general TLC to get it through the tile. I had to buy 2 of these to put up two mirrors, a towel rail and a couple of glass corner shelves. Took me a good couple of hours. They were hard tiles though and no way that a normal masonry bit would have done it though.
Bought to drill very hard porcelane tiles in bathroom. Might have just about drilled 10 holes before it got blunt.
Had to drill some really hard floor tiles. I tried all the normal tile drill bits I had and barely a scratch.
In desperation purchased this drill bit which did the job.
I was struggling drilling porcelain tiles, it was taking me ages then I purchased this little beauty 😀
Wish I'd discovered these sooner, and absolute dream for drilling tiles with zero fuss and hassle.
Worked perfectly for 4 holes in porcelain tiles (so far)
Excellent tile and ceramic drill bit doesn’t wander off the centre line.
Read text about tile drill bits being blunted quickly, but i have used this a few times and found no loss of effectiveness.
Perfect for the job - drilling into bathroom tiles.
After drilling 3 holes through 8mm porcelain tile the drill bit was blunt. It certainly did not last 10 times longer than other brands, in fact I was able to drill 11 holes with my previous own brand bit.
Very good drill for hard creamic floor tiles. Slow speed and a bit of pressure on the drill and this bit went through no problems. I only had 6 holes to drill but the last was as easy as the first. Recommended.
If you go slowly with a little frequent spray of water they are great drills. I used on 8mm porcelain tiles and although I took a few minutes per hole it work great. After 8 holes drill tip edge feels as sharp as it was new.
Good for 5 holes in 8mm porcelain tiles then time to use a new one.
While more expensive than some glass drill bits this bit lasts and cuts much faster and cleaner. Run it at low speed do not put on lots of pressure and you get great results. Works with a dry cut fine. I used it on on some porcelain wall tiles that even diamond hole saws were finding tough but for small holes you cannot use this. I tried the cheaper glass drills and that could manage a single hole and they took a very long time. This drill lasted on many holes and was still cutting like new at the end of the job
Needed a tile drill bit to fit a new toilet, fixing through a tile base to secure the base. This did the job really well, could certainly recommend.
Very good did better than the diamond bits on a hard tile
Excellent price and product. Worth spending more on a better brand. Good service, very helpful.
Drill bit was great but realised as I was using the drill bit that Toolstation had given me a 6mm instead of a 7 mm drill bit
Works well helps to make a for diamond tile drill bit
Did the job perfectly to drill two holes for toilet placement thru tiles. Looks like the bit will easily last a few more jobs
