| Brand | Silverhook |
| Manufacturer Part Number | BIG01 |
| Size | 250ml |
| Type | Body Fillers |
I needed a filler that wasn't water bsed and would cure in cool and damp weather.This seemed to fit the bill and I have been happy with the outcome.I would have rated it higher if the coloured hardener was of a different or darker colour as it wasn't the easiest mix to determine when the hardener was properly dispersed,so I gave it a bit more of a stir,which may have been the maker's intention.The cure time was reasonable and it sanded well,without clogging the paper.Good surface texture when given a coat of sealer and it didn't absorb a lot of the sealer,as some fillers seem to.
Great product especially if you only need a small amount. Two part fillers are needed for strength but they are never easy sand! Mixes and sells well.
Easy to use, easy to sand and good results at a good price
Great filler, thats if you've got a swiss army knife and 10 minutes to spare to get the **!!! tin open.
Easy to mix and use and also easy to sand and gives smooth finish
Easy to use. Sets firm very quickly, mended a badly split water fountain , doesn’t leak at all now.
Easy to use and good price. Very satisfied with this product.
never done any body work on a car before but as I was looking at around £250 for a used C4 boot lid off ebay I thought what the heck. After revoming rust and using a rust treatment to stop coming back I found this filler easy to mix easy to apply and easy to sand back and covered well with red oxide primer and with top coat. looks the part and saved me a lot of money.
Filled damage to a mewp fibre glass bucket really good quality product
Dries fast, easy sand with wet and dry. No pin holes.
Like all of these things virtually impossible to perfectly match filler to hardener. As I always run out of hardener, I've bought a large tube from ASK at Kippax.
Good filler. However, photographs and description can be misleading. I really should have bought a biggeretin!!
Fixed a ding on a courtesy car with this and a Halfords rattle can. Totally pulled it off. Recommend!
I've never done any bodywork before so was relieved that it handled well and went on easily with the supplied flat thing?! It sanded to a lovely smooth surface and took the primer well. Very happy with the result.
Good fast drying, easy to work with filler - no problems
Easy to use, set well and strong but quite quickly
Two part filler which is easy to sand to get a smooth finish, can be used on a variety of surfaces. Can be overpainted. Strong smell until hard.
This is really good filler and at a fraction of the cost of another well-known brand!
Ideal item for my project mending some corroded metal panels.
Really good filler, does the job at a reasonable price. My only concern is the consistency of it, it’s quite runny, a bit like treacle really. When applying it can be tricky because of this, otherwise it dries fast and sands down well. Be careful with the amount of hardener you use, it’s not equal amounts at all, you’d run out of it quickly if it was. Don’t mix too much up at once, do it in small batches if you’ve a lot of filling, because it goes off rapid if you overdo the hardener.
Good value filler - ideal for filling damaged wood. It is easy to sand and leaves a nice smooth finish. It is my second tin.
