| Brand | Everbuild |
| MPN | AC95900 |
Great product, did the job. I didn’t purchase the sealant gun as the job was in a confined space so I just opened the tube up and administered the contents from there, via a small pallet knife, which made the DIY job even cheaper
Product seems to be fine, and the builder liked the viscosity. Annoying though, that I had to buy a huge gun £19.99 to fit the 900ml cartridge. Even then, your problems not over because you need to have something long enough and thin enough to poke down the nozzle and pierce the seal.
Couldn't get it out the tube, it was past expiry date.
Tube was damaged on the end causing end cap to come off where the nozzle was attached so had to chuck the hole tube in bin
Intumescent sealant needed to comply with building regulations, this one seemed to be a good choice
Easy to apply and sets well once I finally managed to get it out of the tube (had to cut it open as it doesn't fit a standard caulk gun)
Top collar with the nozzle separated from the tube casing on first attempt at using it.
Really good performance adheres well to different surfaces
Great value, but you do need a gun that will take 900ml cartridges. Sticks Fireline Plasterboard to steelwork really well with plenty of grab. Works well filling gaps and joins too. Don't forget to pierce the membrane first or you might distort the gun. (Not that I would do anything that stupid!)
Excellent product. Nice and sticky, goes in easily. Doesn't make a string bond, so better as a sealant than adhesive. Which was fine for my use anyway.
Works well - flows easily and fits into my holder easily. Also good price for this stuff
works well, I also use this as a Caulk as it does not shrink and adheres well
I'm sure sealant works well but two tubes split from the top while using in the skeleton gun. Had to apply using a small tool trowel.
Easy to apply and tool up. Excellent adhesion properties and cures to a high bond.
