Trend DGP/IP/HR Inner Plate Hot Rod Template for DG/PRO Jig

Trend DGP/IP/HR Inner Plate Hot Rod Template for DG/PRO Jig

This inner plate frame accessory is for use with the Drainer Groove Pro jig to create grooves for hot rod in solid timber and solid surface worktops.

FEATURES

\n
• Made from 12mm hard wearing CNC machined phenolic
\n
• Accepts hot rods of size 100mm, 200mm, 300mm and 400mm
\n
• Requires suitable plunge router with 30mm guide bush
\n
• Use Ref. C054AX1/2TC, R6.35mm cove (12.7mm diameter) for standard 12.7mm rods, or Ref. C053CX1/2TC, R6mm cove (12mm diameter) for 12mm rods
\n
• Use other cove cutters for other rod diameters
\n
• It is desirable to recess the rods into the worktop by approximately one third to one half of the rod diameter
\n
• Hot rods not included
\n
• Must be used with the DG/PRO jig frame
\n
• X and Y-axis ski and carriage allows forward and back, and side to side movement
\n
• Provides a 0.5 degree fall
\n
• Router carriage has hole to accept 30mm guide bush
\n
• Carriage can be locked to allow parallel groove routing for standard drainer grooves
\n
• Router carriage can also be used for surfacing applications
\n
• Outer frame has index holes at 25mm centres to restrict length of slots and includes two index pins
\n
• Five accessory inner plates available to give various groove effects, straight slot, straight fan, curved fan, lightning fan and hot rod
\n
• Made from 12mm thick hard-wearing machined high pressure laminate
\n
• Patent No. GB1718517.4
\n

JIG REQUIREMENTS

\n
• Guide Bush: 30 mm
\n
• Plunge Router: 1/2 in
\n
• Cutter Cove: R6.35 mm or R6 mm
\n

SPECIFICATION

\n
• Fall: 0.5 Degrees
\n
• Pitch: 50 mm
\n
• Groove length: 100, 200, 300 and 400 mm
\n
• Length: 500 mm
\n
• Width: 500 mm
\n
• Thickness: 12 mm
\n
• Weight: 3.5 kg
\n
• Total Shipping Weight: 4.5 kg
\n