| Brand | Trend |
| Colour | Black |
| Item Depth | 2cm |
| Item Diameter | 4 in |
| Item Height | 15cm |
| Item Weight | 0.12 kg |
| Material | Steel |
| Model | QR/CS/SET |
| Number of Items in Set | 5 |
| Suitable For | Drill |
| Type | Drill Bit |
Great product, nice deep countersink, quick fit release for easy exchange to screw driver
Proper review it is a cracking set, but come on show me the money!!! Done loads of these now and still no win
Excellent quality as you would expect from trend.
Would recommend.
The combination pilot hole and countersink bits are excellent value and do exactly what they're supposed to. Save time. One of these in a drill and an impact driver waiting to drive the screws in and the job takes a fraction of the time. Sharp and easy to alter and adjust to suit each application. They're great.
I’m not impressed with this drill bit set. The bits have no size markings - only arbitrary numbers like #10. The flutes are very short, so the bit clogs quickly, requiring material to be cleared every 10mm or so. The countersinking section is dull and tends to tear the material rather than cut it, which causes severe splintering in plywood. Every hole needs to be filled and sanded to achieve even a semi-decent finish. While the set technically gets the job done, I wouldn’t recommend it and won’t be buying it again.
8mm x 9mm Oak glazing bsad, 16mm long stainless steel pozi csk screws with my favourite countersink more suited to16mm holes!
The 5 piece pilot / countersink set, seemed expensive, already used 3 of the set of 5 without starting the hw bead.it fits perfectly
Great addition to toolbox save the hassle of keep swapping drills/ bits
The countersink & drill cut really well. I needed to drill & countersink a lot of holes to screw down a ton of boards. This great set of countersinks did the job in no time.
Nice little set, only used a couple of sizes, but did what I needed
Having only a single battery drill these bits save time changing between drill and countersink bits. What's great though is you can adjust the countersink bit to provide the correct depth of pilot hole at the same time.
The bits worked well on plywood out of the box. Hopefully they will stay sharp, longer than the cheap sets available online.
The bits work great but I think the price is a little high
Don't waste your money on the cheap internet versions of these. They maybe expensive in comparison but they work so much better and I think they will last.
Its early days as I've only used a couple of the countersink bits on a small job but I've been happy with the performance this far. The countersink themselves are cut cleanly and the bits seem to be of a good quality. Time will tell but for a diy'er like me I'm sure they are more than enough.
good for the price, nice and sharp, decent range of sizes, quick release fitting is helpful
Works very well and extremely robust. Just wish they were soled separately as not all sizes are needed..
Handy set of drill/countersinks. The drill bits have a nice flat ground down them to register with the set-screws and are good quality. The countersinks though have a single cutting edge, which is quite crude, and needs sharpening, especially for use in softwood, before use.
So, I'd say better than a budget set but they could be better out of the box, given that they are quite expensive.
Excellent quality as always with Trend, good value for money, would recommend
Seem to be good quality have used the a couple of times
The best. These are expensive but are well worth the money. Sometimes it's not what it costs but what it's worth. Highly recommended
For a trend product this is poor for the professional
