| Application | Biscuit Jointing |
| Bearing Diameters | 19mm, 22mm, 28.6mm |
| Biscuit Sizes | No 0, No 10, No 20 |
| Brand | Trend |
| Coating | PTFE (Polytetrafluoroethylene) |
| Corded/ Cordless | Both |
| Cutter Diameter | 37.2 mm |
| Kerf/Cut Width | 4.0 mm |
| Material | Tungsten Carbide Tipped |
| Maximum Speed | 24000 RPM |
| Model | TREC152X1/4TC |
| MPN | C152X14TC |
| Number of Flutes | 2 |
| Power (W) | 1 W |
| Router Bit Material | Carbide |
| Router Bit Type | Biscuit Jointer Router Bit |
| Safety Standard | EN847-1/2 |
| Shank Diameter | 1/4 inch |
| Tool Category | CraftPro |
| Type | Biscuit Jointer |
Quality cutter from trend router range only brand I use
Pretty durable, used it on compact laminate worktop, roughly routed 18 biscuits joints and still going strong! Highly recommended, a bit pricey but you get what you pay for!
Does everything it should, has stayed sharp after a lot of uses
Surprisingly good quality bit for the price. Needed it to Cust some biscuits in some compact laminate, worked a treat and lasted 3-4 joints before needing a slight resharpen.
An excellent way of cutting slots to reinforce corner joints. I should have bought one years ago!
Works great! Turn your router into a biscuit joiner and save yourself from buying another tool.
Good piece of kit. Different options to suit various size biscuits.
Does what it says on the tin. Great bit of kit. Saves you buying a biscuit jointer and you can put them wherever you like in the wood.
I was struggling for biscuits fit with an older bit, where they were way too loose and the slots were pointless for boards alignment.
Not with this one. Measured at EXACTLY 4mm wide, the slots are just snug enough to align boards perfectly without being so tight that it's hard to press them together.
Fantastic purchase, well worth the expense!
Good cutter, 3 different size bearings for different size biscuits
So far so good, cuts into composite worktop well..
Finally indulged in a set as only had biscuit jointing kit for my half inch router and have needed to joint smaller items recently. Glad I opted for Trend. All looks, feels and operates as a well engineered, quality product. Worth a slight extra cost. In fact it's that good I'm going to make a small wooden box to keep it in. Not a criticism really, just an excuse to look after something of use and value.
Nice tight 4mm slot of a biscuit, however, burnt out pretty quickly
Bought this to route my kitchen surfaces - worked a treat and was a good price. recommended.
A Trend quality cutter at a good toolstation price
Great bit of kit. Great quality product that pays for itself in the first couple of uses
Perfect alternative to an expensive tool. Includes fixngs for different biscuit sizes. Versatile and great quality router bit.
Perfect for my palm router.
