Very poor quality, cracks if tightened. Much better product else where.
Really not a pleasure to work with
I had problems threading these back on once disassembled. The threads are stiff and hard to thread.
Returning
proper jobxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
While female adaptors are neater on metal boxes, I now prefer male adaptors for plastic boxes. Because plastic boxes have thicker walls that need more thread length.
Cheap and cheerful, not the best but do the job. Can easily get cross threaded.
Rubbish thread will not hold. had to glue in the box in the end will certainly not buy this item again
What can you say about this item does what it is supposed to
Thought these were poor quality stiff on the thread and expensive (45p)for a simple piece of plastic when you can buy metal back box for 50 p or switch for £1
We were very disappointed with the quality of the product.The poor dimensional accuracy of the threads resulted in the threaded components not being able to be tightened.The final turn of the nut ( finger tight ) resulted in the assembly becoming a loose assembly
Does the job. Very strong PVC and very well finished.
Will do the job. Bought several and none failed but they all have little sharp bits which are annoying and need hiding
Functional, works well with the 20mm plastic conduit that I had. Used it to secure the conduit with the MK socket boxes used for my shed/office.
Good item for the money, only let down by slightly weak theads on the securing nut - if you are not careful when fitting the conduit, they can strip and go loose.
Good quality adapter with good fit to conduit and locking nut
I can't review this as I didn't do the fitting only the purchasing
Adapter fit conduit well. Plastic locknut was a bit tight but worked ok.
They do what they are supposed to do, however the quality is pretty shlte and poorly made, be careful of the sharp edges.
Useful extra parts required to finish off the job correctly. Recomend I carry Spares!
Piece was of good quality, good fit to conduit clean thread no issues with any mould run out. You know that annoying thin bit of extra pvc that is still attached to the piece.
