Great for cleaning copper pipes as it is flexible. Easy to cut to size and lasts well. Doesn’t clog up when used on filler or dusty materials.
Long lasting abrasive material. Used for smoothing plaster joins. Good value at Toolstation, bought elsewhere for a few pounds more.
In my opinion its better than most Sandpapers it lasts longer as well.
It's a shame it only come 120 grade
Bought to remove some waxoil off a long window board. P120 sandpaper clogged up immediately. The mesh clogged up also but was removed easily with a stiff brush, so could get repeat usage from each side.
Durable, non clogging and does not wear out quickly. Grit 120 feels like grit 80.
Stupid to review this. Get a life and stop this crap
It's probably my inexperience but this product did not perform as well as expected.
This is a great product. Easy to use much better than sandpaper doesn’t clog up and last for ages.
Never used it before but it made the job so much easier than normal sandpaper that always clog's up
God for sanding with dust extraction, however I always put it von slightly askew so it does not sand lines when using a hand pad.
This product is very efficient and durable, much more efficient to use than sanding paper. Worked out to be cheaper too.
Best products here at the best prices. Would not go anywhere else. Highly trusted
I have been using it with a Swivel Sander Head and a Prep Hand Sander to smooth plaster.
Used wet it captures the dust that can then be mostly rinsed out without removing the mesh from the sanding tool.
I am not sure that the '120' grit is entirely accurate as it seems a bit coarser to me, but it certainly works well in smoothing out imperfection and you can always finish off with finer wet and dry paper if needed.
I used this to clean off copper pipework before fitting soldering or compression fittings , cleans off dirt and paint no problem and much cheaper than the strips you can buy made of similar materials sold specifically for plumbing
Best for new plaster, with no clogging or very low clogging. This is just like an 80-grit Aluminum Oxide sheet, but this one doesn't make clogging like normal sanding sheets. Don't think this one gives a smooth finish. For a smooth finish go for Aluminum Oxide 120 grits or 120 above.
Didn't clog at all when sanding plaster, filler and plasterboard jointing compound. Just wish there were 80g and 240g available too.
Great stuff, bit expensive compared to sand paper but you can wash it and reuse it Which is a game changer 👍
Really great for sanding plaster. I combined this with a sanding pad and I was able to sand an entire wall without changing the sanding mesh—if this had been normal sanding paper I think I would have gone through five or more sheets! It's still sharp so this is really good value for money.
Good value/quality cut off mesh anti clog sanding. Used it to replace the sanding pad on my dry wall sander, works a treat. Easy to cut to size
Very good sanding and seems hard waring and here are a few more words
