Milwaukee M18 FUEL FPS55-552P 18v Brushless 55mm Plunge Saw Inc 2x 5.5Ah HO Batts Guide Rails Full Kit

Milwaukee M18 FUEL FPS55-552P 18v Brushless 55mm Plunge Saw Inc 2x 5.5Ah HO Batteries Guide Rails Full Kit,1x M12-18 FC Charger 1x PACKOUT XL Tool BoxThe M18 FUEL FPS55 plunge saw delivers the power to rip cut at the same feed rate of an equivalent AC circular saw - with the ability to cut 45 metres of 18 mm plywood on one 5.5 Ah battery charge 2x included. This saw has also been designed for optimal dust extraction on the job site, due to the enclosed guard. It is compatible with the DEK26 system and is also supplied with a dust bag. The bevel adjustment has stops at 22.5, 45and 48. It also has a -1 for making a back cut.Supplied with 2x M18 18v 5.5Ah HO Batteries, 1x M12-18 FC Charger in a Milwaukee PACKOUT XL Tool Box. With additional accessories from the full guide rails kit.FEATURESThe depth adjustment has two scales, one for on the rail and one for off the rail, this can easily be adjusted by the press of a buttonFlat sided upper guard, the blade is only 12 mm from the outer edge of the guard allowing the saw to cut very close to a wallScoring stop allows a 1 mm back cut to made minimising any splintering in laminated materialsThe bevel adjustment has stops at 22.5, 45and 48. It also has a -1 for making a back cutThe saw also has a cut line window on the side for those cuts where you need to see the front of the blade against the material and also a sprung loaded riving knifeEasy blade change system locks the switch off and the blade in position while the blade can be changedRetractable riving knife allows the riving knife to stay in position even when making plunge cutsVariable speed from 2500 rpm to 5600 rpmThe DNA of our FUEL platform redefines the balance of cordless technologies. MILWAUKEEs POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUSelectronic intelligence delivering outstanding power, run time and durabilityFlexible battery system works with all MILWAUKEEM18batteriesSPECIFICATIONVoltage 18vBevel Capacity -1 - 48Blade Diameter 165 mmBore Size 20 mmCutting Depth 59 mmMax Cutting Depth 04548 5944 mmMax Cutting Depth With Guide Rail 55 mmMax Cutting Depth With Guide Rail 04548 5542 mmMax Cutting Depth With Guide Rail 45 42 mmNo Load Speed 2500 - 5600 rpm