| Brand | Fischer |
| MPN | 523858 |
Terrible product. Could not get it out of the tube and had to cut the tube open from the top. Product still would not spread. In the end used some thing else. Diabolical product and would advise anyone not to use it.
If you just have some minor repairs to make that dont warrant mixing up a batch of motar, then this is a decent solution. The down side is that if you're aiming to match existing mortar you will struggle. You can't really guage the colour until it's dried and can't mix in a colourant as you would with a manual mortar mix.
Quite a genius product, but Really really hard to get it out of the tube, both with the nozzle, trimmed nozzle or no nozzle, needs to be much more viscous, wouldn't recommend.
Brilliant stuff, does exactly what you need it to do. Easy to work with and great finish.
Easy to apply, slow to cure but did the job would use again
The product is good and does what to is supposed to do. However, it is not Sand colour it is much closer to white. As I was using it to fill in small gaps it really showed up - fortunately I had a bag of sand and was able to press this into the cement but it made the job twice as long.
Realy good product for quick repairs very easy to use with no mess
Bought two. Only one usable. Second tube was dried up
Almost impossible to squeeze the product out of the tube, i must be missing something.
Sets quickly and rock soild, easy to usr, only thing is nozzle a little tricky.
Sand & Cement in a tube? Brilliant
Product performed past my expectations setting time amazing! can’t fault it apart from cost, the more people that use the product cheap it may become?
Easy enough to apply with a cartridge gun and a finger. Did the job well.
Sand - expecting a reddy/brown colour. Nope, almost white, cram coloured if I'm feeling generous. Easy to use, but the result is like a balisha beacon.
It’s easy to use and just right for small areas needing mortar
Easy too use,sets rockhard. Put tube in a bucket of warm water for 10 minutes and buy a decent tube gun for easy extraction. No problem.
can hardly get it out the tube so dont know what its like /
Very good, just reght for repointing some cracks in my wall. Expensive compared to mortar itself though.
Really hard to extract the cement from the tube; nothing like the demo video suggested. As result, needed to squeeze out small quantities and apply manually. Colour is very pale sand (nearer white). Would have been quicker mixing the traditional method.
Handy product ideal for injecting into mortar joints but dries on the light side
A good idea and a good colour match for our existing mortar but it's application is limited by it having no tack at all and therefore of little use for most vertical applications. I had to resort to mixing with PVA. Might be OK for grouting around paving slabs oy similar.
