Small tank for F&E, not too solid but does the job. Good price and comes as a kit
Good value. Note the contents list is incorrect in that a 22mm tank connector is referenced but not included. This come from a universal contents sheet for bigger tanks is included.
I needed a few of the bits in this kit so I just bought the set. I couldn't actually find the overflow connector anywhere else. The jacket is not very good but the rest seems OK
Great kit and great price easy to install with all accessories
Everything you need to do the job and spares if not!
Convenient Kit for 4 Gallon Tank to comply with Regs
I replaced an old central heating header tank with this. The kit contained a ball valve & float with plastic reinforced support, there was also an 22/21mm overflow connection, and 22mm outlet connection, also what I would describe as a (mushroom) breather connection for lid, to let air in, and finally the side and top insulating jacket with plenty of cord. The lid was not pre-drilled.
This kit has everything you need apart from the main tank which can be bought seperately, it is of good quality throughout.
Bought this kit to go with the 4 Gallon Tank which was initially a small 'Test Tank' to replace an old and smelly metal tank in loft which was feeding two sinks in a top floor flat with low pressure. I used it as a method to gauge the header height for a small Boost Pump that i fitted.
It worked so well that i kept it in place on 3 x Breeze Blocks (500-600mm height total).
Kit contained 15mm Mains Water Inlet Float, Overflow Fitting with Mesh Filter, 22mm Outlet Fitting, Air Breather, lid, and Insulation Jacket.
Fantastic Kit with everything you need for Bylaw30 Regs.
Just the job for a small system. Very helpful staff
Great little kit to accompany a new overflow tank. Brass valve and robust plastic. Would buy again but hoping I won’t need to!
Good value for the money. Handy because the tank was already there but needed just the Lid, Bylaw 30 kit and Jacket! Ball valve will be used on another job!
The tank is relatively inexpensive and I bought it because it was a complete Header Tank Kit with ball cock, valve, tank lid overflow connector and insulation. The insulation isn’t generous and the material provided to tie it in place isn’t up to the job and broke easily which was frustrating. The overflow exit pipe was marginally a different diameter to my solvent weld overflow pipe so I purchased a second from Tool Station for pennies that made a better seal. All in all it’s a keenly priced solution which even with my purchasing a better more suitable outlet connector still was good value and I certainly wouldn’t discourage others from purchasing it. It did the job at what I considered a good price.
Got this because I needed a new ballcock and the lid was missing from the heating expansion tank. Wasn't expecting to be able to find a lid separately so this item was a godsend. The insulation was a bit thin but better than nothing.
All the kit you need to up grade your tank but some stuff I didn’t use or need
Good price and very useful when you are missing the lid to the tank
