| Application | Domestic, Commercial, Electrical Wiring |
| Box Shape | Rectangular |
| Brand | BG |
| Colour | Grey |
| Control Style | Toggle |
| Country/Region of Manufacture | China |
| Current Rating | 63 A |
| Current Type | AC |
| Features | Earth Leakage Protection, Test Button, DC Sensitive |
| Finish | Matte |
| Fuse Type | Residual Current Device (RCD) |
| Interruption Type | Residual Current |
| Material | Plastic, Metal |
| Maximum Amperage | 63 A |
| Model | Fortress |
| Mounting Style | DIN Rail Mounting |
| MPN | CFR6330A |
| Number of Gangs | 2 |
| Number of Outlets | 1 |
| Number of Poles | 2 |
| Number of Ports | 1 |
| Number of Switches | 1 |
| Number of Throws | 1 |
| Operation Method | On/Off Switch |
| Plug Type | Screw Terminal |
| Pole Configuration | Double Pole (2P) |
| Port Type | Terminal |
| RCD Type | Type A |
| Sensitivity | 30mA |
| Smart Home Compatibility | Not Applicable |
| Smart Home Protocol | Not Applicable |
| Suitable For | Consumer Units, Distribution Boards, Interior |
| Type | RCD |
| Unit Quantity | 1 |
| Unit Type | Unit |
| Voltage | 230V |
good kit , good value and obtained for me quickly as it was not a stock item .
Fitted it. Pressed button. Nothing happened. Disconnected load and pressed button again. Still nothing. Bought a Wylex from the other place and got money back from TS.
Just the job, in stock at nearest store and 5% discount with club membership.
Great item great price Easy to fit no issues qood quality
replaced type AC RCD - easy fit - tested ok and fast trip time
RCDA type tested very well, fast trip time on 1x
Good value good product
Good product. Would certainly buy again and again.
Purchased this Type A RCD as needed to replace existing A/c RCD to prevent possible interference and failure between the two different types. A new consumer unit was being installed with a type A RCD which also powered an outbuilding - which had a Type A/c RCD. If two different type RCD are potentially on the same circuit they can blind each other in certain fault conditions and fail to operate.- so it’s important to ensure both are of the same type.
bad organized delay missing job because of this
Bought 2 of these, both failed testing, carried out with neither the line or neutral of any circuits connected to the RCD (so no external interference).
One would not trip off even by pressing the test button on the device or 5x testing. The other tripped off even on 1/2x tests and a ramp test tripped it off so quickly my tester (a KT65) couldn't even display a result.
I then brought these back to store and got 2 of the 80A version instead. One of these wouldn't trip off on 1/2x (good), would trip off on 5x (good) and failed to trip off on 1x tests. The other one did have acceptable results; however, I intend to re-test this device on as regular a basis as I am able to as I have lost any trust in BG RCDs and will avoid any BG consumer units and protective devices for the foreseeable future, except in case of replacing failed devices or adding circuits to boards where I don't have a choice.
Great item, straight replacement for my original one. Easy to fit, in stock and a competitive price
Not my choice of RCD but it's a BG Board not fitted by me. Let's hope this one lasts longer than 18months.
