Bosch 44 Piece Metalworking Power Tool Accessories Set

The Bosch PointSeQ HSS Twist Drill Bits enables fast metal drilling due to the PointTeQ design on the drill bit. Quick and easy tapping is possible because the self-centering tip prevents walking and due to the increased drilling rate, heat and wear are reduced. The PointTeQ design on the drill bit remains sharp and withstands continuous use, suitable for drilling through and center holes in alloyed and unalloyed steel, in non-ferrous metals, cast steel, cast iron and plastic. The shaft is cylindrical, the shank is equal to the diameter of the drill and is intended for drill presses and drill drivers, with a low risk of breakage, especially for drills with a diameter less than 6mm, as the drill has been made to have a highly elastic body. The black oxide coated groove allows quick removal of the chips, manufactured according to DIN 338, drill type N small side rake angle with a point angle of 135. The Bosch Standard for INOX Cutting Disc is a thin edged disc that supports smooth, easy cutting in Inox materials. The discs are free of ferrous, sulphurous and chlorinated fillers and comply with the maximum safety requirements, such as EN 12413. The Bosch S1122BF BIM 225mm Reciprocating Blades Flexible for Metal is optimised for flush cutting in metal. The 225mm length and standard-gauge material thickness of 0.9mm enable excellent flush cuts. It includes a tooth pitch of 1.8 mm for working at high speeds. BiMetal for cutting regular-strength steel materials, standard blade length 225 mm for a 175 mm cutting capacity. Tooth pitch of 1.8 mm is ideal for cutting pipes and profiles with a wall thickness of 3 mm to 8 mm