| Brand | B&G |
| Features | Indicator Light, Heavy Duty, On/Off Switch, Wall Mountable |
| Input Voltage | 240 V |
| Material | Polycarbonate |
| MPN | WP42 |
| Number of Outlets | 2 |
| Output Voltage | 240 V |
| Plug Type | United Kingdom |
| Recommended Environment | Outdoor |
| Resistance Properties | Weatherproof |
| Smart Home Compatibility | Not Applicable/Not Available |
| Smart Home Protocol | Not Applicable/Not Available |
| Surge Energy Capacity | 960 J |
| Type | TBA |
| Voltage Conversion | Not Applicable/Not Available |
Used this for outdoor lighting. Very pleased & working well
It was good to have the cable gromets included in the pack. A solid socket with a nice click feel to the switch motion. The corner 90 degree closures are handy and much easier than a screw with a rubber washer attached.
The item did not work but not had chance to return it as yet for a replacement. I am sure it's a good product it's certainly well made and the closure with twist cams is much better than another one I have had.
Proving to be a robust and reliable switch and water proof
Good product
The fixing screw on the front are a big improvement
Easy to wire ip66 2 gang switch, looks good to , would recommend
Robust, well designed, easy to install and hopefully will give a good service life
Excellent outdoor switch. Good robust construction and very good internal terminal quality. Highly recommended product.
The switch is robust and very easy to fit.it was installed inside an outbuilding so there was no need to drill out the drain hole. Can highly recommend and there is plenty of room for wiring.
Reasonable quality and price. Nice to have quick connector for switch to casing built in. (no little screws to lose or have go rusty.
Does what it should. decent guality would definitely buy again..
Brilliant switch for our garage would recomend water pproof
Quality feel and easy push out blanks, looks good too.
Quick easy fit. Does the job.Quick easy fit. Does the job
Bought one, it broke within a week…. Left switch wouldn’t turn off. Exchanged for new one by the store but the same thing happens so bought MK brand instead
Bought as a replacement, liked it because of none screw cover fixing, so no rusty screws.
One of the switches is faulty. I had fitted it before I noticed. The other switch works OK and has a positive click on and off. I now have the hassle of returning and exchanging it :-(
Had one out of box failure, however the second one worked fine. Be careful using the neon with led lights as we had an led driver fail which the manufacturer said was due the the constant voltage through the neon. ( Not the switches fat)
The instructions are comprehensive in regard to how you want the neon to light but my units neon was wired a different way, contradicting how the instructions promised the default would be. The terminations are poor as the neon cable soldered ends stop the screw holding your 1.5mm cables tightly. Put the soldered end to one side. Obviously the neon sits at the top of the faceplate? No. If you want the switch rockers down when closed, as is expected, then the neon was at the bottom. Not sure if you can remove switch rockers as module to invert but is an irritation that I can live with. Maybe my unit was just a bad copy. Looks smart when fitted
