| Application | Light Control, Interior Lighting |
| Box Shape | Square |
| Brand | Axiom |
| Bulb Compatibility | LED, Halogen, Incandescent |
| Colour | White |
| Contact Configuration | Normally Open (NO) |
| Control Style | Rotary Knob, Push Button |
| Country/Region of Manufacture | United Kingdom |
| Current Rating | 10 A |
| Current Type | AC |
| Decorative Style | Traditional |
| Electrical Connection | Screw Terminal |
| Features | Dimmable, Two-way Switching |
| Finish | Moulded |
| Fuse Body Type | Not Applicable |
| Interruption Type | Not Applicable |
| Item Height | 86 mm |
| Item Length | 35 mm |
| Item Width | 86 mm |
| Load Rating | 250W (Incandescent) / 100W (LED) |
| Material | Urea/Plastic |
| Maximum Amperage | 1.5 A (LED Load) |
| Model | DLEDW2G2W |
| Mounting Style | Wall Mount, Flush Mount |
| MPN | DLEDW2G2W |
| Number of Gangs | 2 |
| Number of Outlets | Not Applicable |
| Number of Phases | 1 |
| Number of Poles | 1 |
| Number of Ports | Not Applicable |
| Number of Switches | 2 |
| Number of Throws | 2 |
| Number of Ways | 2 |
| Operation Method | Dimmer |
| Orientation | Vertical/Horizontal |
| Plug Type | Not Applicable |
| Port Type | Not Applicable |
| Resistance Properties | Dust Resistant |
| Room | Any Room, Living Room, Bedroom, Kitchen |
| Smart Home Compatibility | None |
| Smart Home Protocol | Not Applicable |
| Suitable For | Interior Wall |
| Switch Style | Dimmer |
| Type | Dimmer Switch |
| Unit Quantity | 1 |
| Unit Type | Unit |
| Voltage | 220-240 V |
Ordered for next day collection. Was delivered to store but I couldn't be found. Held up the entire rewire. Everyone on went home. Cost me a fortune in lost labour. Never going to Toolstation again.
Does as it states great with dimmable led’s but not if there not led’s
Very satisfied with the results of the look at the project
Easy to install. works as expected (only had it for 1 day). The only small gripe I have is the colour is brilliant white which is a shade lighter than MK, BG or Appleby products.
Good value, excellent quality product working just as required, very satisfied with my purchase
Great result this is the third dimmer I have fitted to the lights in my living room which have LED bulbs and so fare it is the only one that works at all light levels. Previous one flashed at both low and high settings.
Good dimmer that let's you set it at the lowest brightness when you turn on
I like this dimmer as it doesn't need any setting up and works very smoothly from zero to max. Its not too slim profile either so doesn't catch me out if there is a shallow box.
You set the
Brightness by pushing the on/off button four times. One now doesn’t work at all ! May take it back yet
Our previous dimmer failed as the push on/off stopped working. The new switch was easy to install, competitively priced and works perfectly.
Good quality, no problem fitting, good service, fine
Great switch for my LED lights. It gradually increases power to the LEDs when switched on so there is about a second or two after switching on when the lights will be at their required brightness. I’m hoping this may protect the LEDs and increase their longevity. The switch turns 270 degrees from minimum to maximum brightness and the dimming is gradual, ie it doesn’t step. Very happy so far.
Great products and service from Toolstation, as always. Slightly let down by unfriendly counter assistant.
Simple, but brilliant design. Easy to install where there's little space in the back box. Good terminals, dims all types of lamps well.
Works fine but a bit of a square design, but had to have this style as the nicer style was unavailable
This unit replaced a similar unit on which the most used dimmer had been pushed into the backbox as the concealed securing ring.on the shaft had worn the thread off and would no longer hold; hence the need for a replacement.
Fitting was a little fiddly due to the small capacity of the terminals, but was finally successful with a modicum of patience. They both worked satisfactorily from switch on without need to visit the extensive setting instructions provided. The switch does not come with recessed screw covers as other makes do.
A square edge front plate design might not suit everyone. Functions well with dimming range being set by number of presses of knobs at installation. I’m using with 3x40 watt incandescent lamps on each channel - will swop to led when they fail so can’t comment on LED option yet.
