Works well on rusty items but does not dig in to the metal as much as an angel grinder metal disc does
Good size fits in Dewalt drill, needed it to get into corners of the gas hob cast tops to remove stubborn marks/grease etc.
Found this to be great for getting rid of light rust on vehicle bodywork panels because it not only takes you right back to shiny metal but it also nicely smooths down the paint around the rusty area too. For worse rust I used the wire twist brush first, then this.
Abracs poly wheel really worked well for clearing rust and old paint. Giving me the opportunity to repaint and protect the suspension parts on my vehicle.
Totally rubbish, more paint stripped with a polishing cloth than this thing.
Used for removing high build primer from car wheels, works well without taking off metal. However wears down fairly quickly.
Better than Screwfxxxxs. Easily removed rust, flaking and base coat paint on metal handrails. Used cordless drill. Lasted longtime, slow to wear down. Remember to wear PPE face mask, goggles and gloves
Good product used to strip lacquer off a set alloy wheels, left a nice finish.
Excellent addition to my toolbox, fits all drills as far as I am aware.
Removes paint from metal with ease, and doesn't wear too quickly if you're careful to avoid sharp edges.
Useful item. Bought it to prepare some alloy wheels for repainting. Very good for the barrels but could have done with a small version from the more intricate face, but could still do the majority of it. Seems to be lasting pretty well.
Used this to remove varnish from around panels in a 4 Panel internal door. Saved a lot of time and worked well.
Didn't want a really abrasive brush so plumped for this. It's ok I guess, used it once dont think it will last much longer.
80grit sandpaper would have done a better job.Cant see me using it again
Not a bad wheel but thought it might last a bit longer
Used it for removing water based paint on bricks, worked well, especially on the cement between the bricks.Excellent product, great price
Removed a lot of flaking and weak paint easily although just wish it was a bit harsher to allow you to dig into the more stubborn paint a bit more easier. It did help quite a bit though.
Great little tool that easily attaches to most power drills. Great for removing rust / paint from metal surfaces and little to no scratching of the metalwork when finished. Good price and quality tool.
Too abrasive for cleaning gasket material from aluminum surface.
It's good as a soft touch cleaner and I'll be keeping it for future use but it failed to take off the tough paint on brick that i bought it to remove. Had to get an angle grinder for that
Good product but wont last long, great for metal abrasion
